Journals

  1. Faria JJR, Fonseca LGA, de Faria AR, Cantisano A, Cunha TN, Jahed H, Montesano J (2022) Determination of the fatigue behavior of mechanical components through infrared thermography. Engineering Failure Analysis, 134: article 106018.

  2. De'Grandis DK, Donadon MV, de Faria AR, Sales RCM (2021) A CLT based constitutive model to predict distortions and residual stresses in semi-crystalline thermoplastic composites. Journal of Composite Materials, 55(24): 3375–3393.

  3. Faria JJR, de Faria AR (2021) Exploring the openCV library for image processing in long-pulse thermography. Materials Research, 24(supl. 2): article e20210381.

  4. Fonseca LGA, de Faria AR, Batalha MHF, Jahed H (2021) Manufacturing processes role over the residual stress state evolution of crankshafts. The International Journal of Advanced Manufacturing Technology, 112(9): 2425–2433.

  5. Lima AS, de Faria AR (2020) A unified formulation for composite quasi-2D finite elements based on global-local superposition. Composite Structures, 254: article 112846.

  6. de Faria AR, Alhatim O, Maciel HFS (2020) A numerical method to solve nonsymmetric eigensystems applied to dynamics of turbomachinery. International Journal of Computational Methods, 17(9): article 19500737.

  7. Arakaki FK, de Faria AR (2020) Experimental investigation about composite bearing strength. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(6): article 345.

  8. Colombo TCA, Rego RR, de Faria AR, Otubo J (2020) Processing-induced residual stresses in TWIP steel weld spots. Materials and Manufacturing Processes, 35(5): 572-578.

  9. Baier-Saip JA, Baier PA, de Faria AR, Oliveira JC, Baier H (2020) Shear locking in one-dimensional finite element methods. European Journal of Mechanics / A Solids, 79: article 103871.

  10. D'Oliveira ALR, Rego RR, de Faria AR (2020) Residual stresses prediction in machining: hybrid FEM enhanced by assessment of plastic flow. Journal of Materials Processing Technology, 275: article 116332.

  11. Fonseca LGA, Cantisano A, de Faria AR (2020) Numerical modelling of deep rolling influence over crankshaft bending and correlation with fatigue behavior. Fatigue & Fracture of Engineering Materials & Structures, 43(4): 672-683.

  12. Fonseca LGA, de Faria AR (2019) Crankshaft deep rolling analysis through energy balance simulation output. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(10): article 430.

  13. Colombo TCA, Rego RR, Otubo J, de Faria AR (2019) Mechanical reliability of TWIP steel spot weldings. Journal of Materials Processing Technology, 266: 662-674.

  14. Colombo TCA, Santos GJ, Teruel Filho PL, Otubo J, de Faria AR (2018) Microstructure evolution and failure modes of a resistance spot welded TWIP steel. Soldagem & Inspeção, 23(4): 460-473

  15. Makinde OM, de Faria AR, Donadon MV (2018) Prediction of shape distortions in composite wing structures. Latin American Journal of Solids and Structures, 15(11): 1-15.

  16. Arakaki FK, de Faria AR (2018) An engineering vision about composite sandwich structures analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(7): article 333.

  17. Lima AS, de Faria AR (2018) A composite beam element with through the thickness capabilities based on global-local superposition. Composite Structures, 189: 728-742.

  18. Fonseca LGA, de Faria AR (2018) A deep rolling finite element analysis procedure for automotive crankshafts. Journal of Strain Analysis for Engineering Design, 53(3): 178-188.

  19. de Faria AR (2018) Adaptation of the Lanczos algorithm for the solution of buckling eigenvalue problems. Latin American Journal of Solids and Structures, 15(1): 1-9.

  20. Lima AS, de Faria AR (2017) A C1 beam element based on Overhauser interpolation. Latin American Journal of Solids and Structures, 14(1): 92-112.

  21. Arakaki FK, de Faria AR (2016) Composite-stiffened panel design under shear postbuckling behavior. Journal of Composite Materials, 50(26): 3643-3662.

  22. Donadon MV, de Faria AR (2016) Aeroelastic behavior of composite laminated shells with embedded SMA wires under supersonic flow. Aerospace Science and Technology, 52: 157-166.

  23. de Faria AR (2015) Optimization of composite structures under multiple load cases using a discrete approach based on lamination parameters. International Journal for Numerical Methods in Engineering, 104(9): 827-843.

  24. Carmo DA, de Faria AR (2015) A 2D finite element with through the thickness parabolic temperature distribution for heat transfer simulations including welding. Finite Elements in Analysis and Design, 93: 85-95.

  25. Bürger D, de Faria AR, Almeida SFM, Melo FCL, Donadon MV (2012) Ballistic impact simulation of an armour-piercing projectile on hybrid ceramic/fiber reinforced composite armours. International Journal of Impact Engineering, 43: 63-77.

  26. Almeida A, Donadon MV, de Faria AR, Almeida SFM (2012) The effect of piezoelectrically induced stress stiffening on the aeroelastic stability of curved composite panels. Composite Structures, 94(12): 3601-3611.

  27. de Faria AR, Frota Jr. RTC (2012) Robust high-cycle fatigue stress threshold optimization under uncertain loadings. Latin American Journal of Solids and Structures, 9(5): 615-631.

  28. de Faria AR, Oguamanam DCD, Donadon MV (2011) Prebuckling enhancement of imperfect composite plates using piezoelectric actuators. Journal of Applied Mechanics, 78(3): article 031007.

  29. Ferreira APCS, de Faria AR (2010) Simultaneous buckling and fundamental frequency optimization of frames under uncertain loadings. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 32(1): 71-77.

  30. de Faria AR, Donadon MV (2010) The use of piezoelectric stress stiffening to enhance buckling of laminated plates. Latin American Journal of Solids and Structures, 7(2): 167-183.

  31. Donadon MV, Almeida SFM, Arbelo MA, de Faria AR (2009) A three-dimensional ply failure model for composite structures. International Journal of Aerospace Engineering, 2009: article 486063.

  32. de Faria AR (2007) Prebuckling enhancement of beams and plates under uncertain loadings and arbitrary initial imperfections. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 29(4): 388-395.

  33. de Faria AR, Almeida SFM (2006) The maximization of fundamental frequency of structures under arbitrary initial stress states. International Journal for Numerical Methods in Engineering, 65(4): 445-460.

  34. Conrado AC, de Faria AR, Almeida SFM (2005) Optimum design for buckling of arbitrary shaped ribs under uncertain loadings. Aeronautical Journal, 109(1102): 609-618.

  35. de Faria AR, Oguamanam DCD (2005) Adaptive finite element analysis of the dynamic response of spherical caps under traversing loads. Finite Elements in Analysis and Design, 41(11-12): 1027-1042.

  36. de Faria AR (2004) Compliance minimization of structures under uncertain loadings. Latin American Journal of Solids and Structures, 1(4): 363-378.

  37. de Faria AR, Oguamanam DCD (2004) Finite element analysis of the dynamic response of plates under traversing loads using adaptive meshes. Thin-Walled Structures, 42(10): 1481-1493.

  38. de Faria AR (2004) Finite element analysis of the dynamic response of cylindrical panels under traversing loads. European Journal of Mechanics / A Solids, 23(4): 677-687.

  39. de Faria AR (2004) On buckling enhancement of laminated beams with piezoelectric actuators via stress stiffening. Composite Structures, 65(2): 187-192.

  40. de Faria AR, Almeida SFM (2004) Buckling optimization of variable thickness composite plates subjected to nonuniform loads. AIAA Journal, 42(2): 228-231.

  41. de Faria AR (2003) The impact of finite stiffness bonding on the sensing effectiveness of piezoelectric patches. Smart Materials and Structures, 12(4): N5-N8.

  42. de Faria AR, Almeida SFM (2003) Buckling optimization of plates with variable thickness subjected to nonuniform uncertain loads. International Journal of Solids and Structures, 40(15): 3955-3966.

  43. Donadon MV, Almeida SFM, de Faria AR (2002) Stiffening effects on the natural frequencies of laminated plates with piezoelectric actuators. Composites Part B: Engineering, 33(5): 335-342.

  44. de Faria AR (2002) Buckling optimization and antioptimization of composite plates: uncertain loading combinations. International Journal for Numerical Methods in Engineering, 53(3): 719-732.

  45. de Faria AR, Hansen JS (2001) Buckling optimization of composite axisymmetric cylindrical shells under uncertain loading combinations. Journal of Applied Mechanics, 68(4): 632-639.

  46. de Faria AR, Hansen JS (2001) On buckling optimization under uncertain loading combinations. Structural and Multidisciplinary Optimization Journal, 21(4): 272-282.

  47. de Faria AR, Hansen JS (1999) Optimal buckling loads of nonuniform composite plates with thermal residual stresses. Journal of Applied Mechanics, 66(2): 388-395.

  48. de Faria AR, Almeida SFM (1999) Enhancement of pre-buckling behavior of composite beams with geometric imperfections using piezoelectric actuators. Composites Part B: Engineering, 30(1): 43-50.

  49. de Faria AR, Almeida SFM (1998) Axisymmetric actuation of composite cylindrical thin shells with piezoelectric rings. Smart Materials and Structures, 7(6): 843-850.

  50. de Faria AR, Almeida SFM (1996) Modeling of actively damped beams with piezoelectric actuators with finite stiffness bond. Journal of Intelligent Material Systems and Structures, 7(6): 677-688.

Conferences

  1. Salles BS, Lima AS, de Faria AR, Chechi Jr. JT (2021) Topology optimization applied to toolings plants in the automotive industry. 26th International Congress of Mechanical Engineering, 22-26 Nov., Florianópolis, SC, Brazil.

  2. Silva JCS, Lima AS, de Faria AR, Santos GR, da Silva BB (2021) Machining strategy for automotive stamping tools based on machining simulations: a benchmark of Hypermill software. 26th International Congress of Mechanical Engineering, 22-26 Nov., Florianópolis, SC, Brazil.

  3. Canal AD, D'Ávila NIC, Lima AS, Matheus AC, Villani E, de Faria AR, Macedo Jr GM, Di Serio LC, Sakuramoto CY (2021) Die demonstrators for the tooling industry. 26th International Congress of Mechanical Engineering, 22-26 Nov., Florianópolis, SC, Brazil.

  4. Faria JJR, de Faria AR (2021) Long pulse thermography for nondestructive inspection of aeronautical materials. 26th International Congress of Mechanical Engineering, 22-26 Nov., Florianópolis, SC, Brazil.

  5. Guimarães GF, de Faria AR, Rego RR, Robatto LB, Mascheroni JM, Kretzer AR (2021) Compressive behavior of gyroid structures manufactured through SLM with carburizing steels: a numerical and experimental study. 2nd European Conference on the Structural Integrity of Additively Manufactured Materials, 08-10 Sept., virtual conference.

  6. Guimarães GF, de Faria AR, Rego RR, D'Oliveira ALR (2021) A numerical study of the interaction between residual stress profiles induced by quasi-static plastification. 23th International Conference on Solid Mechanics and Finite Element Analysis, 19-20 July, virtual conference.

  7. Faria JJR, de Faria AR (2020) Recent advances in NDT for impact damage detection in composite materials. 5th Brazilian Conference on Composite Materials, 18-22 January 2021, São Carlos, SP, Brazil.

  8. Faria JJR, de Faria AR (2020) Exploring the OpenCV library for image processing in long‐pulse thermography. 5th Brazilian Conference on Composite Materials, 18-22 January 2021, São Carlos, SP, Brazil.

  9. De'Grandis DK, Reis V, Donadon MV, de Faria AR, Arbelo MA (2020) Characterization and simulation of the draping behaviour of thermoplastic fabrics. 5th Brazilian Conference on Composite Materials, 18-22 January 2021, São Carlos, SP, Brazil.

  10. Fonseca LGA, de Faria AR, Jahed H, Montesano J (2020) Material model selection for crankshaft deep rolling process numerical simulation. WCX World Congress Experience, Technical Paper 2020-01-1078, 21-23 Apr., Detroit, MI, USA.
  11. De'Grandis DK, Donadon MV, de Faria AR, Arbelo MA, Reis VL, Guimarães A (2019) Characterization and simulation of the draping behaviour of composite woven fabrics. 25th International Congress of Mechanical Engineering, 20-25 Oct., Uberlândia, MG, Brazil. (best paper of session SOL05)

  12. Lima AS, de Faria AR (2019) Assessment of different local interpolations for a global-local superposition 2D finite element. 25th International Congress of Mechanical Engineering, 20-25 Oct., Uberlândia, MG, Brazil. (best paper of session SOL09)

  13. de Faria AR, Larsson R (2019) Failure induced by instability in structural composites under longitudinal compression. Aerospace Technology Congress 2019, 8-9 Oct., Stockholm, Sweden.

  14. Oliveira SAC, Larsson R, Donadon MV, de Faria AR, Selegård L (2019) Failure prediction in fiber-reinforced composites based on continuum damage mechanics. 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites, 18-20 Sept., Girona, Spain.

  15. Lima AS, de Faria AR (2018) Thermoelastic analytical solution for 2D composite laminates. 4th Brazilian Conference on Composite Materials, 22-25 July, Rio de Janeiro, RJ, Brazil.

  16. Lima AS, de Faria AR, Faria JJR (2018) Critical review of displacement-based laminate theories and modeling techniques. 4th Brazilian Conference on Composite Materials, 22-25 July, Rio de Janeiro, RJ, Brazil.

  17. Makinde OM, de Faria AR, Donadon MV (2017) Shape distortions of angled sandwich panels. XXV ABCM International Congress of Mechanical Engineering, 3-8 Dec., Curitiba, PR, Brazil.

  18. Makinde OM, de Faria AR, Donadon MV (2017) Shape distortion predictions of curved sandwich panels: a parametric study. XXV ABCM International Congress of Mechanical Engineering, 3-8 Dec., Curitiba, PR, Brazil.

  19. Fonseca LGA, de Faria AR (2017) Energy balance approach to analyze crankshaft deep rolling simulation results. XXV ABCM International Congress of Mechanical Engineering, 3-8 Dec., Curitiba, PR, Brazil.

  20. Colombo TCA, dos Santos GJ, de Faria AR, Braga V, Junior LFR (2017) The effect of welding current on mechanical behavior of resistance-spot welded TWIP steel joints, XXV ABCM International Congress of Mechanical Engineering, 3-8 Dec., Curitiba, PR, Brazil.

  21. Colombo TCA, Sena FM, Faria JJR, de Faria AR (2017) Analysis of the effect of spot welding current on the mechanical behavior and failure modes of automotive steel sheets, XXV ABCM International Congress of Mechanical Engineering, 3-8 Dec., Curitiba, PR, Brazil.

  22. Colombo TCA, Montenegro P, Borille AV, Sakuramoto CY, de Faria AR (2017) Mechanical properties and formability of a Fe-Mn-C-Al-Si TWIP steel. 7th International Sheet Metal Forming Conference, 4-6 Oct., Porto Alegre, RS, Brazil.

  23. Makinde OM, de Faria AR, Donadon MV (2017) Prediction of shape distortions in angled composite structures. International Symposium on Solid Mechanics - MecSol 2017, 26-28 Apr., Joinville, SC, Brazil.

  24. de Faria AR, Donadon MV F (2017) Aeroelastic response of shape memory alloy hybrid composite cylindrical shells under supersonic flow. XVII International Symposium on Dynamic Problems of Mechanics, 5-10 Mar., São Sebastião, SP, Brazil.

  25. de Faria AR, Åkermo M, Hallström S, Nyman T, Ferraz F (2016) Prediction of post-cure residual stresses and distortions in the fabrication of composite structures. Aerospace Technology Congress 2016, 11-12 Oct., Stockholm, Sweden.

  26. Colombo TCA, Borille AV, Sakuramoto CY, Prado MB, Schaeffer L, de Faria AR (2016) TRIP and TWIP steel sheets: review of metallurgy and forming aspects. 6th International Sheet Metal Forming Conference, 5-7 Oct., Porto Alegre, RS, Brazil.

  27. de Faria AR, Donadon MV (2016) Prediction of post-cure residual stresses and distortions in the fabrication of composite structures. 3rd Brazilian Conference on Composite Materials, 28-31 Aug., Gramado, RS, Brazil.

  28. de Faria AR (2014) Optimization of composite structures under multiple load cases using a dicrete approach based on lamination parameters. 4th International Conference on Engineering Optimization, 8-11 Sept., Lisbon, Portugal.

  29. Donadon MV, de Faria AR, de Almeida SFM (2013) The inverse piezoelectric effects on the aeroelastic stability of composite shells. XXII International Congress of Mechanical Engineering, 3-7 Nov., Ribeirão Preto, SP, Brazil.

  30. Iwamura RS, de Faria AR (2013) Topology optimization of multiple load case structures. International Symposium on Solid Mechanics - MecSol 2013, 18-19 Apr., Porto Alegre, RS, Brazil.

  31. de Faria AR, Frota Jr. RTC (2012) Techniques for optimizing the forging process. 16th International Forging Conference, 22-24 Oct., Porto Alegre, RS, Brazil.

  32. Almeida AE, Donadon MV, de Faria AR, Almeida SFM (2012) Aeroelastic stability analysis of orthotropic plates with embedded piezoelectric materials: finite element formulation. 1st Brazilian Conference on Composite Materials, 16-19 July, Natal, RN, Brazil.
  33. de Faria AR, Donadon MV (2011) On buckling enhancement of laminated plates with piezoelectric actuators via stress stiffening. III International Symposium on Solid Mechanics - MecSol 2011, 25-27 May, Florianópolis, SC, Brazil.

  34. Cavalcante I, Donadon MV, de Faria AR, Rizzi P, Almeida SFM (2011) Postbuckling analysis of aeronautical panels manufactured using friction stir welding technology. III International Symposium on Solid Mechanics - MecSol 2011, 25-27 May, Florianópolis, SC, Brazil.

  35. de Faria AR (2011) Finite element dynamic analysis of cylindrical panels under moving loads. XIV International Symposium on Dynamic Problems of Mechanics, 13-18 Mar., Maresias, SP, Brazil.

  36. de Faria AR (2010) Buckling optimization and prebuckling enhancement of imperfect composite plates using piezoelectric actuators. XXXI Iberian Latin-American Congress on Computational Methods in Engineering, 15-18 Nov., Buenos Aires, Argentina.

  37. Martins LA, de Faria AR (2009) Assessment of linearized buckling and nonlinear behavior of composite panels. 2009 Brazilian Symposium on Aerospace Engineering and Applications, 14-16 Sept., São José dos Campos, SP, Brazil.

  38. Ferreira APCS, de Faria AR, Almeida SFM (2009) Simultaneous buckling and fundamental frequency optimization of composite plates under uncertain loadings. 17th International Conference on Composite Materials, 27-31 July, Edinburgh, UK.

  39. Hernandes JA, Ferreira RTL, de Faria AR, Meleiro RM (2008) An assessment of structural optimization using CATIA V5. SAE 2008 Brazil Congress, 7-9 Oct., São Paulo, SP, Brazil.

  40. Ferreira APCS, de Faria AR (2008) Simultaneous buckling and fundamental frequency optimization of frames under uncertain loadings. 12th AIAA/ISSMO Multidisciplinary Analysis & Optimization Conference, 10-12 Sept., Victoria, BC, Canada.

  41. Donadon MV, de Faria AR, Almeida SFM (2008) Failure analysis of internally pressurized pipes with bonded composite repair patches. V National Congress of Mechanical Engineering , 18-21 Aug., Salvador, BA, Brazil.

  42. de Faria AR, de Jesus A (2007) Plastic analysis of internally pressurized aluminum pipes strengthened with a composite repair. XIX International Congress of Mechanical Engineering, 5-9 Nov., Brasília, DF, Brazil.

  43. Cabral SCM, de Faria AR (2007) Aircraft wing rib topoly optimized design. XIX International Congress of Mechanical Engineering, 5-9 Nov., Brasília, DF, Brazil.

  44. Frota Jr. RTC, de Faria AR, de Souza EN, Barbosa CA (2007) Analysis of internal void closure in large ingots by finite element method. XIX International Congress of Mechanical Engineering, 5-9 Nov., Brasília, DF, Brazil.

  45. Frota Jr. RTC, de Faria AR, de Souza EN, Barbosa CA (2007) Finite element simulation of open die forging process with different die geometries: internal void closure in large ingots. 62nd ABM International Annual Congress, 23-27 July, Vitória, ES, Brazil.

  46. Wolf JR, de Faria AR, Menezes MA (2007) Conceptual design and fabrication of a rocket de-spin system. IV Brazilian Congress of Manufacturing Engineering, 15-18 Apr., Estância de São Pedro, SP, Brazil.

  47. de Faria AR, Oguamanam DCD (2007) Dynamic analysis of spherical caps under moving loads using Mindlin elements. XII International Symposium on Dynamic Problems of Mechanics, 26 Feb.-02 Mar., Ilha Bela, SP, Brazil.

  48. de Faria AR (2005) Solution of buckling eigenproblems through a new variant of the Lanczos algorithm. XVIII International Congress of Mechanical Engineering, 6-11 Nov., Ouro Preto, MG, Brazil.

  49. de Faria AR, Almeida SFM (2005) Optimum buckling load of heterogeneous composite plates subjected to uncertain thermal and mechanical loadings. Fifteenth International Conference on Composite Materials, 27 June-01 July, Durban, South Africa.

  50. Conrado AC, de Faria AR, Almeida SFM (2005) A procedure to optimize ribs subjected to several load cases. 6th World Congress of Structural and Multidisciplinary Optimization, 30 May-03 June, Rio de Janeiro, RJ, Brazil.

  51. de Faria AR, Oguamanam DCD (2005) Dynamic analysis of plates under moving loads using Mindlin elements. XI International Symposium on Dynamic Problems of Mechanics, 28 Feb.-04 Mar., Ouro Preto, MG, Brazil.

  52. Conrado AC, de Faria AR, Almeida SFM (2004) Buckling optimization of arbitrary shape plates under uncertain loads. XXV Iberian Latin-American Congress on Computational Methods in Engineering, 10-12 Nov., Recife, PE, Brazil.

  53. de Faria AR, Cardozo L, Fonseca IM (2004) On the structural optimization for space applications using the min-max technique. 55th International Astronautical Congress, 04-08 Oct., Vancouver, BC, Canada.

  54. de Faria AR, Cardozo L, Fonseca IM (2004) Brazilian multimission platform solar array generator deployment. 55th International Astronautical Congress, 04-08 Oct., Vancouver, BC, Canada.

  55. de Faria AR, Almeida SFM (2004) Buckling optimization of variable thickness composite plates subjected to uncertain thermal and mechanical loadings. 10th AIAA/ISSMO Multidisciplinary Analysis & Optimization Conference, 30 Aug.-01 Sept., Albany, NY, USA.

  56. de Faria AR, Almeida SFM (2004) Buckling optimization of composite plates subjected to uncertain thermal and nonuniform mechanical loadings. Inverse Problems, Design and Optimization Symposium, 17-19 Mar., Rio de Janeiro, RJ, Brazil.

  57. de Faria AR (2003) Sensing effectiveness of piezoelectric patches with finite stiffness bonding. XVII Brazilian Congress of Mechanical Engineering, 10-14 Nov., São Paulo, SP, Brazil.

  58. de Faria AR, Almeida SFM (2003) Buckling optimization of variable thickness plates subjected to nonuniform uncertain loads. XXIV Iberian Latin-American Congress on Computational Methods in Engineering, 29-31 Oct., Ouro Preto, MG, Brazil.

  59. de Faria AR, Falco SA (2003) Truss optimization through an interface between Nastran and Faipa. XXIV Iberian Latin-American Congress on Computational Methods in Engineering, 29-31 Oct., Ouro Preto, MG, Brazil.

  60. de Faria AR, de Paula CF, da Silva PA (2002) Preliminary wing design optimization: a knowledge-based engineering approach. SAE 2002 Brazil Congress, 19-21 Nov., São Paulo, SP, Brazil.

  61. de Faria AR, Falco SA (2002) Interface between MSC.Nastran and Faipa, an interior point algorithm for optimal design. 3rd Worldwide Aerospace Conference and Technology Showcase, 8-10 April, Toulouse, France.

  62. Falco SA, de Faria AR (2002) Optimization of a simple aircraft wing. 3rd Worldwide Aerospace Conference and Technology Showcase, 8-10 April, Toulouse, France.

  63. Falco SA, de Faria AR (2002) Structural optimization of a satellite interface: performance assessment of commercial codes. International Conference on High Performance Structures and Composite Materials 2002, 11-13 March, Seville, Spain.

  64. de Faria AR (2001) Buckling optimization under uncertain loading combinations: a stability boundary approach. XVI Brazilian Congress of Mechanical Engineering, 26-30 Nov., Uberlândia, MG, Brazil.

  65. Falco SA, de Faria AR (2001) Performance evaluation of structural optimization tools applied to two representative aerospace problems. XVI Brazilian Congress of Mechanical Engineering, 26-30 Nov., Uberlândia, MG, Brazil.

  66. de Faria AR, Hansen JS (2000) Buckling optimization of composite axisymmetric cylindrical shells under uncertain loading combinations. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 3-6 April, Atlanta, GA, USA.

  67. de Faria AR, Hansen JS (1999) Buckling optimization of composite plates under uncertain loading combinations. XV Brazilian Congress of Mechanical Engineering, 22-26 Nov., Águas de Lindóia, SP, Brazil.

  68. de Faria AR, Hansen JS (1999) Buckling load optimization of composite plates via min-max formulation. 3rd World Congress of Structural and Multidisciplinary Optimization, 17-21 May, Buffalo, NY, USA.

  69. de Faria AR, Hansen JS (1999) Min-max formulation for heterogeneous composite plates with thermal residual stresses. 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April, St. Louis, MO, USA.

  70. de Faria AR, Almeida SFM (1997) Axisymmetric actuation of composite cylindrical shells with piezoelectric rings. XIV Brazilian Congress of Mechanical Engineering, 8-12 Dec., Bauru, SP, Brazil.